@PP

Du skulle hellere finde diagrammet til MKIII displayprintet, så ville jeg blive glad

__________________
Format 0 ►►► HD A/V Link on Steriods ⚡⚡⚡⚡ ☺

Fejl: Der skal stå - 200 Watt og ICE 200 (ASC) ved link til pdf datablad.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

beovox141 - diagrammet til MKIII displayprintet

Det vil jeg tro du kan få ved at lægge et indlæg på BeoWorld.
Eller sende mig en PM, så du kan få e-mail adresse til Martin, som vil kunne hjælpe dig.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

Diagram BeoLab Penta Mk III display printet.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

Beolab Penta - Type 6621, 6622, 6623, 6624, 6625. Display printet.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

@PP

Jeg ved godt hvordan de ser ud

Men kan du løse B&O NØRDE QUIZen over i B&O clubben, og gætte hvor det display hører til ?

__________________
Format 0 ►►► HD A/V Link on Steriods ⚡⚡⚡⚡ ☺

@ beovox141

Den quiz er løst. Du spurgte efter diagram
over Penta display print, og det har du fået.

Hvad skal du bruge diagrammet til.  ?

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

@PP

Mærkeligt, jeg ser først dine indlæg nu....

Du har fået byttet rundt på dem,
- MKIII har alphanumerisk dot matrix display
som det nederste diagram,
mens MK II har det ambergule 7 segment
Som det øverste.
Men skidt med det, tusind tak for hjælpen!
You are the MAN!

Det er til mine Avant line arrays, jeg ville se om der var en nem måde at få displayet til at køre, uden at skille mine Pentaer!
..samt om jeg kan skifte det grønne display til et rødt på Pentaerne

__________________
Format 0 ►►► HD A/V Link on Steriods ⚡⚡⚡⚡ ☺

BeoVision Avant TV har RJ45 PL out.

Terminering af RJ45 - 8 pol DIN adapter, som svare til PowerLink Mk III.
Uden display visning. - For BeoLab Penta Mk 2 & 3.

Terminering af RJ45 - 2 x Phono/RCA adapter. Uden display visning. -
For BeoLab Penta Mk 1.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

Skulle du have problemer med din partner, om at få lov til at
installere et sæt Penta, på grund af størrelsen, findes gode råd -  Click her.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

Se YouTube Mix - Beolab Panta 2. - Afmonter forstærker. - Click her.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

Så er påskebryggen i hus, Danmark rundt!

Også en tur til hovedstaden i B&O universet, Struer!

De er meget ængstelige deroppe.
Antallet af kinesere på byens hoteller og resturanter har været højt i det sidste års tid, så hvad der nu er offentiliggjort, var ventet.
..Eller,- at det var en enkelt kineser og ikke en teknologivirksomhed var vist lidt af en overraskelse!
Som de også siger Tue,- han lover og han lover... og har vist reelt ikke helt styr over situationen.
Det passer sikker på en prik, at den dag motorvejen endelig er færdig, synker skuden mens Tude spiller "Nearer My God to Thee" på et
produkt der har mistet netværkforbindelsen...

Hvor ville jeg ønske at Kirby, Novo eller Mærsk ville spytte de par millarder i kassen, og indsætte en kompetent ledelse. Eller
pensionskasserne, de må gerne bruge mine kroner på at redde et ikon,- og en landsdel!

På vej efter påskebryg kom jeg lige forbi Millermissen, så han kunne få hans ramme øl, men der var ingen der lukkede op. Jeg kiggede
gennem vinduet, og staklen var faldet i søvn foran det lille Vone med hovedtelefonerne på, mens der lå den lillle bog "Kinesisk for
begyndere" på gulvet...

Hvilket minder mig om,- sådan lidt uofficielt,- men alligevel baseret for en del "datapunkter", det virker det som om at det er kvinderne
der bestemmer, når der bliver valgt Vone

Best af alt!,- jeg fik endelig fat i verdens måske bedste centerhøjttaler!

__________________
Format 0 ►►► HD A/V Link on Steriods ⚡⚡⚡⚡ ☺

beovox141 - Best af alt!,- jeg fik endelig fat i verdens måske bedste centerhøjttaler!

Ja BeoLab 10 spiller fantastisk op til Penta højttalerne som center.
Hvornår ser vi så Penta højttalerne i dit nye setup.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

beovox141 det er da synd hvis jeg har taget fejl af dit indkøb. MoTiNI vil give mig ret.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

På denne tråd, skriver Martin om B&O reparationer han har haft på bænken.

Her om Beolab Penta mk III: - This pair was delivered to my door by the owner.
Very beautiful speakers that were both still playing but the owner was of the opinion that
they wereno longer performing their best and he wanted me to restore them to their former
glory.A brief test proved one of them to actually sound somewhat alright while the other
had a strangemidrange reproduction as if one or more of the midrange drivers had foam rot
but I was told that they werealready refoam'ed so that couldn't be the case. Work started
and the crossover filters received new capacitors. So did the amplifier section and the two
large cans in the power supply in each tower was replaced with new 105degC types.

The signal path was upgraded with a couple of WIMA MKS-2 capacitors and the wonderful
OPA2134 operational amplifier. A check revealed the usual cracked solder joints to the driver
transistors and the ribbon cable to the fold out front panel. The midrange problem turned out to
be caused by a bad refoam job; One driver rubbed badly on the center piece when moved and
all four had surrounds fitted that were cut down to size, presumably because the refoamer didn't
have the correct size at hand. Where the cut ends met up, there was just an opening, no glue or
anything. The glue used didn't hold on particularly good so the surrounds could be pulled right off.

When removed the original size of the foam ring could immediately be revealed in that the
remains sprungback to the size of what could easily have been a 5" ring. And this was a pro job
( ! ? ). All internal cabling in the towers was then bypassed and new Van Del Hul Snowline cable
was fitted. All the spade-type plugs were cut off and the connections soldered instead.

Let me say right away that it'smy opinion that those spade-type connectors are in fact very good
and the original internal cabling adequate butthe owner wanted it this way and, well, it doesn't
harm anything as long as cable lengths are kept long enough forthe crossover boards to be pulled
out without desoldering anything. New trimmers were fitted to the amplifiers and the idle current
and DC offsets were set as per factory specs. Three days of work and the final testing proved the
job to be worthwhile. The speakers now sounded considerably more fresh, open and ready and
also much more identical. Gonewas also the strange midrange performance. The restoration was
rounded off with a fitting of fresh cloth to the four front grill panels. The original cloth was actually
still intact but it had faded and greyed badly as most of these have by now.

Everything now sounded clear, bright and undisturbed again and the speakers looked great.
The Pentas were always one of my own favourite speaker designs. 

Martin.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

Fjern Pentas front stof. - Remove Penta covers - Click her.

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.

En måde at få flotte blanke stål sider på Penta.

            

Stainless steel cleaner omtale Click her. 

__________________
Mvh. Peter Pan. Se link - DIN-RJ45-Adapter.- PPsetup.- Div.& Diy.