Sendt: 08 Maj 2017 kl. 10:20 | IP-adresse registreret
|
|
|
her er min svogers beskrivelse af problemet - det kan sikkert spore nogen ind på problemet? Hi Claus - thanks so much for this - that's really a help as I have no idea about the network in Denmark for these things :) So the problem is with the Quad 66 pre-amp: I powered it on one day and the display looked corrupted - it was stuck on AV input, the EQ filters and EQ tilt display was activated which I never used) and none of the remote controls would work. I tried connecting the remote control directly (there is a special cable to plug in) and it didn't make any difference. And there was no audio path, even through AV.
I suspect that a chip controller has blown, because of the corrupted display - here's a photo which I took at the time, which I thought was slightly funny because it seems the amplifier is saying "ouch" in Danish ;)
The lines marked "2" is the EQ tilt function, of course I would always use it with flat EQ - so something in the electronics for control has gone kaput I think :-/
Thanks so much! See you next weekend!
|