Hvordan kan man se forskel?

Er der stor forskel på de 2 modeller?

Hvad var nypris?

http://www.xtz.se/se/produkter/oversikt/serier/99-mkii-serie n.htm

Google er opfundet.

Mig bekendt, kan jeg ikke få svar på mine 3 spørgsmål der?

Mr. MBG skrev: Mig bekendt, kan jeg ikke få svar på mine 3 spørgsmål der?

2 af dem gør man, hvis man gider bruge 1 til 2 minutter på den side som Madmax linker til

http://www.xtz.se/se/produkter/hogtalare/99-36-mkii-piano#

Og 3. svar er faktisk på selve siden her

http://www.hifi4all.dk/brugeranm/Anmeldelse.asp?Kat=1&id =177

Okey sorry. Er bare ikke så smart til svensk.

Er der en der i korte træk vil forklar hvordan man kan se forskel.

Er de ikke lige meget , hvis du kan lide lyden.

Hvis der følger manuel med , så står det der.

Joo det rigtig nok. Men ønsker lige at kunne se forskel.

Mr. MBG skrev: Joo det rigtig nok. Men ønsker lige at kunne se forskel.

Over the years the 99.36 became a huge success, as very few other speakers on the market offer a similar price/quality ratio. Then, in 2011, we went beyond: It was time to take a look at one of our best speakers to check if we could get it even better! Time had come for the new, further optimized 99.36MKII model.

The new 99.36MKII version has got updated crossover filters, optimized for the best possible performance in terms of phase linearity and frequency response. Just like its predecessor, the new model is equipped with SEAS Excel High End drivers, providing an absolutely clean and transparent sound. 60 years of experience supports these drivers.

It also features a ribbon tweeter to ensure a superior transient response and very flat frequency response. For the 99.36 MKII, we carefully selected all components. The goal was to offer a top end floor standing speaker with a minimum of coloring, and with a finish normally not found in this price range.
Developing the new version we had the goal to further optimize phase response, obtain even flatter frequency response, reduce distortion at a physically possible minimum, optimize tweeter and bass adjustments, and, last but not least, optimize impedance for being easily powered! In short terms, we asked the impossible to our developers:

When Olle (Mr. Eliasson, president of XTZ) called me, as usual for him it was more night than evening, initially I was quite surprised, then a little embarrassed: he asked me if we could work on the 99.36 model, he told me it was time to think about a MKII version. He asked if we could improve the speaker. When he told me what he expected, I told him it would be a quite hard job to do, as I remembered that speaker being really good, especially at the price point. As I expected a long working period I told him immediately it wouldn’t be “economic”, but he was decided to do it. For me it was exactly that kind of challenge I love, so I accepted! During the following months we developed one of the most complex and tricky crossover networks I ever built for a series production speaker. When, after three months of hard work (together with my technician), the final filter was built up, we ran the first listening sessions under real-life conditions. I remember that day a couple of customers being present, they participated and couldn’t believe their ears: those speakers were better than anything else at prices even way higher. They were convinced the price was around 6 or 7 k-Euros! I have to admit, it was an incredible satisfaction for me, I think I can proudly say there isn’t any comparable speaker at this price on the market. The only problem I had at this point was to convince Olle to use that filter- it was really complex, needed very high quality components with huge air-coils and lowest tolerance capacitors, I feared it was simply too expensive to realize. Actually we discussed a little bit.. and, my fault, the new version got a little more expensive. But he did it, and the MKII model was born!”

Nogen der ved hvordan man kan se forskel på de 2 modeller? Da det ikke står nogen steder.

( Newbiee2 )

Det står heller ikke hvordan man kan se forskel der desværre :o(

Der er ikke nogen synlig forandringer på dem.

Det da for ringe.

Så ved man jo ikke om det er den nye eller gamle model man køber

Men de ser sådan ud dem jeg kigger på:

Så kunne jeg godt tænke mig at vide om de er MKI eller MKII.

Sælger ved det ikke, men siger de er 5 år gamle.

Med det serienummer og ingen angivelse af at der skulle være tale om en MKII, vil jeg gå stærkt udfra at det er en MKI

Det er for galt at der ikke bare står Mark II på bagside af dem, et problemet at man skal skille dem af få at finde ud af om det er Mark I eller Mark II udgave man har købt, kan give stor og dumme problemer ved bl.a. brugt salg, hvor manual og emb. er gået tabt.

Det eneste jeg kan tænke mig er at skrive til XTZ og oplyse serie nummer, for de burde vide det ud fra serie nummeret om det er tale om mark I eller Mark II.

Den model du har på billedet er en mk I , du kan se det diskanten .

Hvordan kan jeg se det på diskanten?

Hvad er forskel?