highenden skrev:
Den "Coaxial" du har lige før din soundbar, er det et enkelt digitalkabel eller er det 2 analoge phono kabler ? |
|
|
Det er et enkelt digitalt kabel.
Normalt er jeg også glad for det dynamiske lydbillede, som det giver. Men i og med, at jeg bor i lejlighed og gerne vil have
muligheden for, bare at skrue en smule ned for det.
Jeg er blevet godt og grundig rundforvirret af de indstillinger, jeg kan vælge imellem på min afspiller. Så jeg lader det være op til
jer, at bestemme, hvordan og hvorledes det hele skal sættes op. Alle informationer kommer fra diverse manualer.
Specifikationer på soundbar samt subwoofer:
Audio
Soundbar Includes two-way, dual-driver left and right soundbar speaker modules, each with two 75mm (3") midrange drivers and a
19mm (3/4")-dome tweeter, video-shielded
■ Wireless,100-watt,poweredsubwooferwitha250mm(10") driver in a ported enclosure
■ Soundbaramplifierpower:25Wx2into8ohms,20Hz – 20kHz, at <0.07% THD, with both channels driven simultaneously
Specifications
Soundbarspeakers:Twox75mm(3")conemidrangespeakers and one x 19mm (3/4") dome tweeter per channel
■ Soundbar amplifier power: 2 x 25W
■ Wireless subwoofer amplifier power: 100 watts ■ System frequency response: 50Hz – 20kHz
Indstillingsmuligheder på BD-Afspiller:
PCM Down Sampling
On : Select this when the Amplifier connected to the player is not 96KHz compatible. 96KHz signals will be down converted to
48KHz
Off : Select this when the Amplifier connected to the player is 96KHz compatible. Signals will be output without any
changes.
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
On : When Movie soundtracks are played at low volume
or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent
dramatic passages from getting too loud.
Off : You can enjoy the movie with the standard Dynamic Range.
Downmixing mode
This option enable you to compatible with Dolby Pro Logic systems.
normal stereo : This is for just downmixing into 2ch
audio. It is not compatible with Dolby Surround or Dolby
Surround Pro Logic or Dolby Pro Logic II.
Surround Compatible : The 2/0 Lt/Rt downmix is a two-
channel Dolby Surround compatible output that can be decoded by Dolby Surround (passive), Dolby Surround Pro Logic (active) or
Dolby Pro Logic II (active) decoders.
This downmix provides backward compatibility with existing
recorded on two-channel media such as the videotape used by videocassette recorders.
Speaker
Speaker
• Large : Delivers full bandwidth sound with bass below 100 Hz.
• Small : If LFE is on, bass below 100 Hz will be outputted through a Subwoofer instead of the
speakers. If LFE is off and the Front Speaker is set to Large, sound will be outputted through the
Front Speaker.
• none : Select to disable the speakers.
Subwoofer Speaker
• On : Select to use the subwoofer speaker.
• Off : Select to disable the subwoofer speaker.
(This option can only be selected when the Front (L+R) speakers are set to Large.)
Jeg håber, at der er en, som giver sig tid til at hjælpe mig med mit problem :-)