Jeg overvejer at købe en  Samsung DVD-afspiller DVD-HD935.

Er der nogen som ved om man selv kan gøre den kodefri?

På www.pixmania.com skriver de:

Zone-afkodelig (kontakt producent for instruktioner om zone-afkodning)

Men hos Samsung vil de ikke oplyse om det er muligt.

Er det noget man selv kan gøre eller kan få gjort billigt et eller andet sted???

 

mvh. Dan

__________________
dmp

det kan godt lade sig gøre..

her er hvad der står på regionfreedvd.net:

www.regionfreedvd.net skrev: 1. Turn the player on and wait for "No Disc" to be displayed. 2. Press Repeat, followed by 5, 7, 5, 3, 8 and then set the region number, or 9 for region free. 3. For Region 4, use 7, 6, 8, 8, 4. Region 1 coded type: 2 9 3 3 4 or, Region 2 coded type: 3 8 7 6 7 or, Region 3 coded type: 5 6 7 3 2 or, Region 4 coded type: 7 6 8 8 4 or, Region 5 coded type: 5 3 8 1 4 or, Region 6 coded type: 2 4 4 6 2 Note: some versions of the MC20 may need chipping. Another example method, which disables Macrovision too apparently - this one is for Region 4, but just substitute the numbers in steps 3-7 accordingly as above: 1. Press the DVD button on the remote control 2. Press the Repeat A-B button on the remote control 3. Press the 7 button on the remote control 4. Press the 6 button on the remote control 5. Press the 8 button on the remote control 6. Press the 8 button on the remote control 7. Press the 4 button on the remote control 8. Press the 1 button on the remote control for region 1, the 2 button for region 2, and so on, or press the 9 button for multi-region playback 9. Press the Open/Close button on your DVD player 10. Press the Open/Close button on your DVD player 11. Power off your DVD player 12. Power on your DVD player Here's another for the MC20, that may well work on the M105 too: Make sure there is no disk in the tray. Switch on the machine. When the NO DISC message appears on screen press Repeat (not repeat A-B) on the remote (NB. this must be done before the message disappears) and type in the numbers 57538 using your remote . If it worked, 02, should appear in the top left corner showing the region your model is currently on. Before these numbers dissappear press 9 to make it multi region (or 1 for region 1, 2 for region 2 etc). Press the Open/Close button on your remote, wait 15 seconds and then press standby on the remote to turn off the machine. When you put the player back on,it should be multi region.

http://www.regionfreedvd.net/player/samsung.html

 

Tak for hjælpen!

jeg tror jeg bestiller en og forsøger om det virker.

mvh. Dan

__________________
dmp