Sælger den her helt fantastiske højttaler da den er lidt for lille til mit rum ( har en stor stue)
Sættet er i perfekt stand.
1 sæt Raidho X1.6 Sort
1 sæt Stander Scansonic Twin Stand
NB: IsoAcoustics Gaia III følger ikke med. Standerne står med originale spikes.
Ny pris for det hele ligger på
Højttaler 54.000 kr + Twin stand 6000 kr + - 60.000kr
De spiller virkelig fantastisk. Klart, detaljeret og med et kæmpe stort lydbillede der er langt større end hvad man kan forvente af højttaler i den størrelse.
Jeg har den til at spille med en REL S/510 subwoofer som lige lidt mere i bunden. Da jeg sluttede den til blev jeg virkelig overasket over hvor meget bund der er i dem uden en sub.
Kan ses og høres i Horsens.
Prisen er helt fast da jeg ellers hellere selv vil beholde dem for mindre
De kan i princippet også sendes
Højttalerne er nogle der er indgået i en haden hvor jeg solgte nogle endnu større Raidho XT1 højttaler der ikke passede i mit rums akustik.
Topology
2 way
Bass Loading
Vented design. Port in the rear
Drivers
1 x Raidho Ribbon Tweeter
1 x 6,5” Raidho Ceramix driver
Crossover Point
3,5 KHz
Frequency Range
45Hz–50KHz+/-3dB
Sensitivity
87 dB 2,83 V/m
Nominal Impedance
>6 ohm
Power Requirement
>50 W (Though we have seen excellent results with small tube amplifiers)
Finish
Black piano and White piano
Dimensions WxHxD, mm
200x360x265
Weight, kg
11,5
Prepare to be amazed with the new X1.6
The front baffle is made of cast aluminum that is an impressive 20 mm thick. This heavy-duty construction is normally only seen in super High End loudspeakers. This makes for the perfect foundation to place the Raidho Ribbon Tweeter and the 6,5” Ceramix bass driver.
The X1.6 has an unbelievable open and transparent sound which can only come from the famous Ribbon Tweeter. But the bass performance and power by this small loudspeaker is just as impressive.
Prepare to be amazed with the new X1.6.
Tweeter
Our proprietary, trademark ribbon tweeter is a unique design. It is completely designed and build by hand in-house in Denmark. To be exact, it is a planar Magnetic Tweeter due to the tracks in the foil.
The foil is 11 micron thick, which means it is 50 times less mass in comparison to a conventional dome tweeter. This is because there is no voice coil and the extremely low weight of the foil (20 milligrams).
The result is virtually no resonances or distortion, and the breakup point is at an incredible 82 KHz! What you hear is amazingly clear and natural sound. All the detail in the world, but no fatigue, no distortion, and no coloration!
For the TD series, we looked at how we could improve the tweeter to match the new drivers. A redesign of the magnets, waveguide, and rear panel to optimize airflow, helped us to raise the sensitivity by 3 dB, and reduce the already low levels of distortion by 35 dB. This raised the level of performance further, making our world-class tweeter even better. |
